How to Clean Your Toilet Tank

In case you already notice some stains or mineral buildup in your toilet tanks, you should already exert the extra effort to clean them off. However, some of these tough stains can prove to be quite challenging to remove. This article lists down the steps you need to do to deal with the dirt, stain, and mineral build-up in your tank.

Drain the Tank

The first thing that you need to do when it comes to cleaning your toilet tank is to drain the water from it completely. According to the best Canberra plumbers, you should do this regardless of whether you are using a comfort height toilet or a standard height toilet because, in this way, you will be able to inspect the condition of your tank better. After you have drained all the water, you need to shut off the water valve to keep water from filling the tank once more. From there, take off the lid to see if there is still some water remaining, as well as its level in the tank. If there is still some water inside, flush the toilet to drain the tank entirely.

When the tank is empty, inspect the tank to see whether the dirt and grime are only on the surface. If so, then cleaning your tank will prove to be a breeze. Otherwise, if you notice mineral deposits or stains at the base of the tank that creeps to its wall, then make sure to have some vinegar ready.

However, you need to have at least three gallons of it, or less depending on the size of your tank. Pour the vinegar inside and leave it there for about twelve hours or more. This will loosen the mineral deposits and even moulds and mildew if ever. After letting the vinegar sit, flush the vinegar completely, flushing your toilet a couple of times to remove any vinegar residue.

Use a Disinfectant

Perform a preliminary cleaning on your toilet tank by using a disinfectant after you have flushed the water or the vinegar from it. Make sure to wear some rubber gloves in doing so because you need to spray the disinfectant cleaner into the interior of your tank, including its base and walls. Just keep in mind to avoid spraying the metal parts because this can cause them to corrode later on. Leave the disinfectant on your tank for a couple of minutes, depending on the instructions indicated in its label.

Clean with a Brush

After letting the disinfectant sit, you can proceed with the proper cleaning of your toilet tank using a scrub brush. As much as possible, have a scrub brush dedicated to the cleaning of your tank only to ensure that you don’t introduce any new contaminants in your tank. Long and thin scrub brushes with bristles will allow you to reach the corners of your tank best. You should also clean all the metal parts in the tank using a sponge with clean and warm water. From there, all that is left for you to do is to rinse your tank completely.

To effectively clean your toilet tank, make sure that you completely drain the water first. From there, you can use a disinfectant for a preliminary cleaning then follow through with the use of a brush. After this, just rinse your tank and you are good to go. Keep in mind that for any hard to remove stains, some natural cleaning solutions such as vinegar can already do the trick. The key is to regularly clean your tank by following the steps above to ensure that any pertinent stains are avoided.